Immergas ARES PRO 150 Instructions And Recommendations Download Page 3

Page: 3 / 48

Warning this manual contains the exclusive instructions for use for professionally qualified

installers and/or maintenance technicians, in compliance with laws in force.

The USER is not authorised to intervene on the boiler.

The manufacturer will not be held liable in the case of damage to people, animals or property

due to the failure to observe the instructions contained in the manuals supplied with the boiler

INDEX

General information ............................................................4

1.1 Symbols used in the manual ........................................................4

1.2 Compliant use of the appliance ...................................................4

1.3 Information to be provided to the user .....................................4

1.4 Safety warnings .............................................................................5

1.5 Regulations for installation..........................................................6

1.6 Installation .....................................................................................6

1.7 Water treatment ............................................................................7

1.8 General recommendations ..........................................................8

Technical features and dimensions............................................9

2.1 Internal view with indications of main components .................

2.2 Dimensions ..................................................................................10

2.2.1 Dimensions to install the boiler in heating control unit .......11

2.2.2 View to accessibility inside ........................................................12

2.3 Diagram of water side head losses ............................................13

2.3.1 Determination of the primary circuit pump

or boiler pump ............................................................................13

2.4 Functioning data / general features ..........................................14

2.5 Technical parameters for combination boilers

(in compliance with Regulation 813/2013). ............................15

Instructions for Installation ..............................................19

3.1 General recommendations ........................................................19

3.2 Packaging .....................................................................................20

3.2.1 Handling ......................................................................................20

3.3 Positioning the heating control unit.........................................21

3.4 Flue exhaust pipe connection ....................................................22

3.5 Connection ..................................................................................23

3.6 System filling and emptying ......................................................25

3.7 Electrical connections ................................................................25

3.8 First ignition ................................................................................30

3.9 On-site measurement of the combustion efficiency...............31

3.9.1 Enable the calibration function.................................................31

3.9.2 Positioning the probes ................................................................32

3.10 Burner adjustment ......................................................................32

Inspection and maintenance .............................................37

4.1 Instructions for inspection and maintenance .........................37

4.2 Adapt it for use with other gases ...............................................40

4.3 Programming the operation parameters .................................41

4.4 Wiring diagram for practical connection ................................44

4.5 Error code ....................................................................................46

The company

IMMERGAS S.p.A.

, with registered office in via Cisa Ligure 95 42041 Brescello (RE), declares that the design, manufacturing and

after-sales assistance processes comply with the requirements of standard

UNI EN ISO 9001:2015

For further details on the product CE marking, request a copy of the Declaration of Conformity from the manufacturer, specifying the appliance

model and the language of the country.

STD.005480/001

Summary of Contents for ARES PRO 150

















































Search results

Summary of Contents for ARES PRO 150

Reviews:

Related manuals for ARES PRO 150

Brands by name

Popular brands

Immergas ARES PRO 150, Instructions And Recommendations

Search results

Summary of Contents for ARES PRO 150

Reviews:

Related manuals for ARES PRO 150

Brands by name

Popular brands