manualshive.com logo in svg

Immergas 3.025499, Instruction And Recomendation Booklet

Share
Download
Immergas 3.025499 Instruction And Recomendation Booklet Download Page 4

INDEX

 USER 

 page

 INSTALLER

 page

 MAINTENANCE TECHNICIAN

 page

1  Boiler installation .......................................5

1.1  Installation recommendations. .................5

1.2  Main boiler dimensions. ............................6

1.3  Main dimensions of the remote zone 

control. .........................................................7

1.4  Gas connection. ..........................................7

1.5  Boiler hydraulic connection. .....................7

1.6  Solar circuit hydraulic connection. ..........7

1.7  Electric connection. ....................................8

1.8  Programmable room thermostats 

(Optional). ...................................................9

1.9  External temperature probe (Optional). ..9

1.10 Humidity temperature probes (optional). 9

1.11 Immergas flue systems. ............................10

1.12 Tables of resistance factors and equivalent 

lengths. .......................................................10

1.13 Installation of boiler type B with open 

chamber and fan assisted (optional). .....12

1.14 Concentric horizontal kit installation. ...13

1.15 Concentric vertical kit installation. ........14

1.16 Separator kit installation. .........................15

1.17 Adaptor C9 kit installation.  ....................16

1.18 Ducting of flues or technical slots. .........17

1.19 Configuration type B, open chamber and 

fan assisted for indoors. ...........................17

1.20 Flue exhaust to flue/chimney. .................17

1.21 Flues, chimneys, chimney pots and 

terminals. ...................................................18

1.22 Central heating / cooling circuit filling. .18

1.23 Condensate trap filling. ............................18

1.24 Gas system start-up. .................................18

1.25 Solar circuit start-up. ................................18

1.26 Solar circuit filling. ...................................18

1.27 Boiler start up (ignition). .........................19

1.28 DHW mixing valve. ..................................19

1.29 Hot water storage tank. ............................19

1.30 Circulation pump......................................20

1.31 Solar circulation unit components. ........22

1.32 Kits available on request. .........................22

1.33 Boiler components. ...................................23

2  Use and maintenance instructions .........24

2.1  Cleaning and maintenance. .....................24

2.2  General warnings. .....................................24

2.3  Remote zone control - control panel. .....25

2.4  Boiler control panel. .................................25

2.5  Description of functioning states ...........26

2.6  Using the boiler. ........................................26

2.7  Boiler parameters and information  

menu. ..........................................................27

2.8  Use of the remote zone control. ..............28

2.9 Troubleshooting. .......................................32

2.10 Boiler shutdown. .......................................34

2.11 Restoring central heating system  

pressure. .....................................................34

2.12 Emptying the system and the storage  

tank. ............................................................34

2.13 Anti-freeze protection. .............................34

2.14 Case cleaning. ............................................34

2.15 Decommissioning. ....................................34

3  Boiler commissioning (initial check) .....35

3.1  Hydraulic diagram. ...................................36

3.2  Installation example Hydraulic  

Diagram . ...................................................37

3.3  Wiring diagram - boiler circuit. ..............38

3.4 Troubleshooting. .......................................40

3.5  Converting the boiler  

to other types of gas. .................................40

3.6  Calibration of number of fan revs. .........40

3.7  Adjustment of the air-gas ratio. ..............40

3.8  Checks following conversion to another 

type of gas. .................................................41

3.9  Programming the boiler P.C.B. ...............41

3.10 Programming the boiler remote  

control.  ......................................................43

3.11 Programming the remote zone control 

parameters.  ...............................................46

3.12 ‘’Chimney sweep’’ function. .....................47

3.13 Pump anti-lock function. ........................47

3.14 three-way anti-lock function. ..................47

3.15 Radiators anti-freeze function. ...............47

3.16 Boiler control panel electronic board 

periodic self-check. ...................................47

3.17 Automatic vent function. .........................47

3.18 Yearly appliance check and  

maintenance. .............................................47

3.19 Casing removal. ........................................48

3.20 Boiler separation. ......................................54

3.21 Variable heat output. ................................58

3.22 Combustion parameters. .........................58

3.23 TECHNICAL DATA. ...............................59

3.24 Key for Data nameplate. ..........................60

3.25 Technical parameters for combination 

boilers (in compliance with Regulation 

813/2013). ..................................................61

3.26 Product fiche (in compliance with 

Regulation 811/2013). ..............................61

3.27 Parameters for filling in  

the package fiche. ......................................62

Summary of Contents for 3.025499





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands