Immergas 3.025499, Instruction And Recomendation Booklet

Page: 28 / 68

28
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
2.8 USE OF THE REMOTE ZONE
CONTROL.
The remote zone control manages the heating /
cooling system and with it one can configure the
various operation options.
The following functions apply both for the re-
mote main zone control and for any additional
remote zone controls.
- Buttons to the side of the display (2 ÷ 5 Fig.
2-1) allow to select the available functions.
- Main selector (1 Fig. 2-1) by turning it one
can select the values of the parameters. The
parameter being edited flashes, to store the
selected value press the main selector.
Once the device is powered it goes into “
off
”
mode.
2-4
Programming current day and time. Press and
hold the “time slot ” button until the “
Cloc
”
function appears.
2-5
Select the function and adjust it according to the
current time and day.
2-6
Ignition. Press and hold the “on / off ” button;
the remote control goes into stand-by and dis-
plays the operating modes, the room temperature
and the time.
2-7
Selection of operating mode.
By pressing the
“Mode ” button one can select the operating
mode of the system in cyclic mode between:
- “Cooling “ ”, system operating in room
cooling (performed by the heat pump) and
domestic hot water production mode.
- “Heating “ ”, system operating in room heat-
ing and domestic hot water production mode.
- “Domestic hot water ”, system operating in
domestic hot water production mode only.
Time slots adjustment. The “Time band” param-
eter enables to adjust the room temperatures in
time slots, it is possible to adjust up to a maxi-
mum of 6 time slots and the programming can
be set day by day for the whole week, for 5 days
(Mon-Fri) and 2 days (Sat-Sun).
Press and hold the “time band ” button until
the “
Cloc
” function appears, turn the main
selector until the “
Time band
” param-
eter appears
2-8
Select the function and adjust the time slots.
- Select the interval of days that one wishes to
program, the days being programmed flash.
2-9
- Select the time slots, which are shown accord-
ing to the sequence below:
Time slot 1, Time slot 2,
Time slot 3, Time slot 4, Time
slot 5, Time slot 6
2-10