
71
Card Name:
This field defaults to “MVN-XC440” but can be set to any descriptive
name. The name provided here will also appear in the Dashboard™ Tree View.
SNMP Traps:
This allows SNMP traps to be enabled or disabled
4
. Note that this
setting does not take effect immediately – it will become active the next time the card is
rebooted.
MIB File Download:
The MVN-XC440 provides an up-to-date copy of its MIBs. If
you click on the
Save
button, a zip file with the relevant MIBs will be downloaded to
your computer. This zip file contains the card MIBs, as well as the Ross Video and
openGear MIBs required to compile the card MIBs.
The Admin General Tab is depicted below:
Admin Firmware Tab
The MVN-XC440 can hold up to three distinct firmware images: a
Factory
image, and two
upgrade images, called
Image 1
and
Image 2
. The Factory image can never be overwritten, and
will always be available as a fall-back in case of problems or failed updates. Image 1 and
Image 2 can be updated at will. Since the card offers two upgrade images, it is always possible
to fall back to the previous image if there are any problems with the current one. The card will
also automatically fall back to the factory image if it detects a corrupted firmware image. Finally,
the push buttons on the front of the card allow for a forced override to the factory image, as
described in the Front Switches section.
MVN-XC440 firmware is updated in the same fashion as with any standard openGear™ card.
Once you obtained the upgrade image from ImmediaTV, place it anywhere in your computer and
click on the
Upload
button, as shown below. A dialog box allows you to select the upgrade file.
Note that you can simultaneously upgrade all of your MVN-XC440 cards over multiple chassis if
you wish. For more detail, consult the
Dashboard User Manual
, chapter 6, section
Upgrading
Device Software
. The Dashboard manual can be downloaded from:
http://www.opengear.tv/n/?p=94
4
SNMP is an optional feature in the openGear™ frame controller. The MVN-XC440 SNMP functions are only
available if SNMP is licensed in the frame controller.