66
In the same fashion as with the Source Selection, the names can be customized, and the selection
can be presented as addresses rather than names. Both situations are illustrated below.
Finally, the
Destination Program
number can be configured. It offers two options:
Auto-Select:
the Destination Program number will be automatically selected by the
MVN-XC440. If possible, the MVN-XC440 will use the same program number as the
Source Program. The program number will be changed only if there are already other
connections to this particular output, and the program number is already in use. The
actual program number used can be found in The Current Connections Table.
Specify Program:
if you want to control the destination program number, you can
choose this option. A new field will open for this configuration: