54
Transcoders
The Transcoders Configuration Tab allows the configuration of up to 4 transcoding sessions.
The Statistics tab provides quick feedback on the status of each transcoding session.
Transcoders Configuration Tab
The
Transcoder Channels
table, shown below, has a summary of the status of each transcoding
session and its more important parameters.
The
Status
column indicates the overall state of the session at a glance. If it indicates
Running
,
the transcoding session is operating normally. If it indicates
Idle
, the transcoding session is not
operating; more detail can be found in the Transcoder Statistics Tab.
Click on the
Edit
button to configure a specific transcoder session. When the button is clicked,
the transcoder configuration area is displayed. This area is divided into three parts:
The
Transcoder Configuration
section, which contains all the transcoder parameters.
The
Established Connections
section, which lists all current connections to the
transcoder (both inputs and outputs). This section is available in the configuration area
for all MVN-XC440 input and output ports.
The
Add Connections
Controls
, which allows new input and output connections to the
transcoder to be added. This section is available in the configuration area for all
MVN-XC440 input and output ports.
Transcoder Configuration Parameters
The Transcoder Configuration section is depicted below. It is pre-populated with the current
configuration for the selected transcoder session.