24
o
Not Installed
: The MVN-XC440 is not connected to a rear module. The card
is operating normally, but it will not be useful as there are no input and output
connections to it.
o
Wrong Module:
The MVN-XC440 is connected to a rear module that was not
designed for it (most likely from another openGear™ vendor). Depending on the
signals present on that module, there may be a small chance of damage to the
MVN-XC440; ImmediaTV recommends that this situation be rectified
immediately. This alarm will cause the front status LED to turn red.
Card Uptime:
Indicates how long the card has been running since it was last rebooted.
Ambient Temperature:
Temperature, in degrees centigrade, of the air intake of the card
(measured at the front edge of the card).
Internal Temperature:
Temperature, in degrees centigrade, at the back of the card.
MDP Core Temperature:
Temperature, in degrees centigrade, of the core processing
element.
Card Power (W):
Indicates the current power draw of the unit, in watts.
The openGear™ frame is designed to operate in environments with up to 40
o
C ambient. There is
typically a 5
o
C temperature raise from the external ambient to the “Ambient Temperature”
measured by the MVN-XC440. If that measurement is at 45
o
C or higher, action must be taken to
cool down the ambient temperature. The MVN-XC440 will log excessive temperature events.