50
NGate page
– from this screen it is possible to make the available Noise Gate Active:
To Edit press ENTER on the NGate Page and the entering arrow will appear as in the example
below:
The Noise Gate's parameters (Attack/Release times and Threshold) can be edited and set by Pc
Sw
Source page
– from this page it is possible to assign one of the following Inputs to any
Equalizer's Channel:
1.
Analog InA = Input Channel A
2.
Analog InB = Input Channel B
3.
Analog InA+B = Sum of Input Channel A/2 + Input Channel B/2
4.
Digital Left = Input S/PDIF Channel Left
5.
Digital Right = Input S/PDIF Channel Right
6.
Digital L+R = Sum of Input S/PDIF Channel Left/2 + Input S/PDIF Channel Right/2
The following is an example screen for the “Source” where Analog Input A is assigned to Equalizer
's Channel A (named Left):
After pressing ENTER an arrow will appear on the left of the screen “
->
” the Input can be selected
by rotating either the “PM2” or “PM3” encoders.
Gain page
– from this screen it is possible to set the Equalizer 's Channels Level from -15dB to
+15dB, press ENTER an arrow will appear on the left of the screen “
->
” then use the “PM1” or
“PM2” buttons.
The value set on this screen will only affect the input level of the selected Equalizer's Channel
LIN/RIN. The following is an example screen for the “Gain” page where the Gain of the Equalizer 's
Channel A (named Left) is set to +0.0dB
Polarity page
– from this page it is possible to set the Equalizer's Channel Polarity, by using the
“PM1” or “PM2” encoders.
The polarity can be “Normal” or “Inverted” (which means rotated of 180 Degrees).
The following is an example of a “Polarity” screen where the Polarity of the Equalizer 's Channel A
(named Left) is set to “Normal”
OutputA Left Source
Source = Analog InA
OutputA Left Gain
-> Gain = + 0.0dB
OutputA Left Polarity
-> Polarity = Normal
OutputA Left NGate
Noise Gate = On
OutputA Left NGate
-> Noise Gate = On
