40
Ramps on changes:
this page allows you to activate or de-activate Fading-in and Fading-out
ramps on the input/output volumes when any parameter changes:
When connected to the DEQ-230 by the PC remote control software, it is possible to request
sudden parameter changes where the difference between the old parameter and the new one
can cause unwanted “click” noises (big differences in volume changes) or “bumps” (big
differences in Hp/Lp filters cutting frequency values) as the DSP reconfigures.
The Fading-In and Fading-Out ramps eliminate any potential clicks and bumps.
This function can be de-activated when the unit needs to be used in “live” conditions and small
parameter adjustments are requested “on the fly” during live performance.
The following screen shows the Fading ramps function is Off and therefore de-activated:
Software Version:
this page allows you to confirm the Software Version running on the
DEQ-230:
The correct Software Version is “V1.01”
SYSTEM UTILITY
-- Ramps on Changes --
Ramps on changes
Ramps : Off *
SYSTEM UTILITY
-- Software Version --
