42
By using the “PM2” or “PM3” encoder it is possible to scroll through the stored presets. Once
the desired preset appears on the screen select it by pressing the “ENTER” button and this will
force the DEQ-230 to begin to load this selected preset and the following transitory screen will
appear:
Once loaded the DEQ-230 will exit to the “Recall a Program” screen automatically and the
above screen will disappear:
Note
: at any time it is possible to quit the recalling action by pressing the “ESC” button.
Save a Program:
this page allows you to store a new preset in the DEQ-230’s memory:
By pressing the ENTER button and rotating the “PM2” or “PM3” encoder, it is possible to scroll
through the previously saved presets and the available empty locations (identified by “Empty
Memory”).
If no user presets are stored, the “Save a Program” screen will show empty memory locations
for all 09-32 presets as shown in the example below for location 10:
When storing an edited configuration for the DEQ-230, select the location for a preset from the
24 available
by using the “PM2” or “PM3” encoders.
Once the desired location appears on the screen press ENTER again to reach the “
Set
Program Name
” page.
In this page the User can enter a Preset Name (
up to 16 Characters
) by using the “PM2” or
“PM3” encoder to choose a character and the “NAV/PAR1” encoder to move between the 16
available locations for the character’s positioning.
The current position of the cursor is shown by a “blinking underscore”.
Save a Program
10: Empty Memory
Loading New Program ......
09: PRESET 1
PROGRAM UTILITY
-- Recall a Program --
PROGRAM UTILITY
-- Save a Program --
