36
MENU “Channel A/B” Input Channels Editing [Access by pushing the “LIN/RIN” buttons]
NAV/PAR1 Encoder
NAV/PAR1 Enc.
PM2 Enc.
PM3 Enc.
[to navigate between menus]
[to chose values for the parameters, no need to confirm the chosen values,
which are automatically loaded during the encoders use]
1. Output
[x]
[Name]
Name
Name =
[Name]
->
Name =
_
(For Editing the Device's Name, refer to the Details on the“Utility Menus Use” Section)
2. Output
[x]
[Name]
NGate
Noise Gate = Off
Noise Gate = Off
*
Noise Gate = On
3. Output
[x]
[Name]
Source
Source = Analog InA
-
>
Source = Analog InA
PAR1 N/A
Analog InA
Same as PAR2
Analog
InB
Analog
InA+InB
Digital
Left
Digital
Right
Digital
L+R
4. Output
[x]
[Name]
Gain
Gain = + 0.0 dB
->
Gain = + 0.0 dB
PAR1 N/A
-15 dB
Same as PAR2
:
+15
dB
5. Output
[x]
[Name]
Polarity
Polarity = Normal
->
Polarity = Normal
PAR1 N/A
Normal
Same as PAR2
Invert
6. Output
[x]
[Name]
Delay
Delay = 0.000 ms
->
Delay = 0.000 ms
PAR1 N/A
000.0000mS
000.0000mS
[1 ms steps]
[20.8 us steps]
848.0000mS
000.9984mS
7. Output
[x]
[Name]
HPF
20.0 Hz No Cut-Off
->
20.0 Hz No Cut-Off
PAR1 N/A
[Freq.]
20Hz
[Type/Slope]
No Cut-Off
:
:
20kHz
Bessel 24dB/Oct
8. Output
[x]
[Name]
LPF
20.0 Hz No Cut-Off
->
20.0 Hz No Cut-Off
PAR1 N/A
[Freq.]
20Hz
[Type/Slope]
No Cut-Off
:
:
20kHz
Bessel 24dB/Oct
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ESC
ENTER
ESC
ENTER
