IMET Spa VELOX 350 AF-NC, User Instructions

Page: 10 / 73

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
VELOX 350AF-NC ED.2011eng rev.00 10/73
+ When choosing and then using equipment such as ropes, chains or lifting belts, be careful about their geometry
during the lifting and about the consequent actual loading capacity.
+ The machine is structured so as to offer lifting points, which are appropriately indicated and will have to be used for
lifting it.
+ In case the lifting belts touch parts of the machine, nylon belts are required; ropes or chains wrapped with jute or
clean covering can also be used. A great care is necessary while slinging and moving the machine in order to hinder
damages.
+ All operations have to be conducted with graduality, so as to avoid jolts and dangerous situations.
+ The person in charge of the operations has to make sure that all the national, local and company norms in reference
to injury prevention and work safety are respected.
+ One or more areas for material storage have to be identified.
If the machine is contained in a protection cage, after taking away the packing material, control the machine entireness.
The weight is written on the packing outside and it is in the technical data of this instruction manual too.
The monobloc floor stand also allows to make the displacement with a lift truck placed at the front side (from the position
of the operator).
In this case the " forks " of the lift truck must have a length equal or superior than 1 meter.
Make sure that lifting tools are proper for the weight and that the moving is correctly made without unbalancing the
machine.
DO NOT USE THE MOVABLE ARM WITH THE CONTROL PANEL AS LIFTING UP POINT.
In case of newt manipulations, the machine should be displaced with the saw frame completely down and the feeding
carriage should be placed nearly to the cutting unit (minimum stroke). The movable arm with control panel should be
locked by the proper spacer and by the handles, which must hinder the rotation.
Transport with wooden crate or wooden case. ( BY REQUEST , ON CHARGE )
The machine is wrapped with thermoplastic material in order to assure a suited protection of all its parts; then it is packed
into a wooden crate or cage to protect it from collisions, inclement weather and so on.
To lift it, use a forklift from front side of machine, with forks length 1.5 m or more (see picture ).
You need to follow the indications you find on the packing before proceeding to moving or opening it.
WARNING
The size of the packing varies according to the machine ordered and its configuration.
WARNING
The machine is fixed to the packing by means of screws, so as to hinder that it can move during the transport (see
drawing in the following page)
6 -FITTINGS ASSEMBLING
The information necessary for the installation are given together with the fittings. Anyway you can find here following a
short description of the product.
Loading Roller Tables - To install them rightly, it is necessary first of all to level and fix the machine on the floor. To level
and line up the loading roller table refer to the work table and to the supporting back jaws. Start from the one that is