IMET Spa VELOX 350 AF-NC, User Instructions

Page: 12 / 73

TRADUCTION OF THE ORIGINAL USER’S INSTRUCTIONS
VELOX 350AF-NC ED.2011eng rev.00 12/73
For making a right cut it is also necessary to establish the pitch ( t ) or the suitable number of teeth ( z ). The blade must
generally have the toothing as follows:
- close toothing for cutting thin materials, tubular and profiles (for example 108 or 96 teeth with a negative inclination for
reducing the noise too !;)
- thin toothing for cutting solid materials or pieces that need a long piece of blade (for example 72 or 84 teeths with
positive inclination for a better penetration inside the cutting piece);
By choosing the right one you can avoid a lot of working errors and you can get a good blade penetration and the
necessary space for the chips.
If you cut more pieces at the same time, you must consider them as one piece (that is you have to consider the global
size).
These general indications are necessary for a right choice. It can also be updated or changed by the user according to his
personal experiences.