5
USER GUIDE
© Copyright Imerge Ltd 2007
Page
MS5000
MediaServer
AV2 P
B
COMPONENT VIDEO OUT
Connect the P
B
Component Video Out of the MediaServer
to the P
B
Component Video In of a suitable TV (depending
on the supplied configuration) to display the TV User
Interface. You may also need to switch the TV to the
relevant AUX input to display the picture.
AV2 PR COMPONENT VIDEO OUT
Connect the P
R
Component Video Out of the
MediaServer to the P
R
Component Video In of a suitable
TV (depending on the supplied configuration) to display
the TV User Interface. You may also need to switch the
TV to the relevant AUX input to display the picture.
AV2 P
Y
COMPONENT VIDEO OUT
Connect the P
Y
Component Video Out of the
MediaServer to the P
Y
Component Video In of a suitable
TV (depending on the supplied configuration) to display
the TV User Interface. You may also need to switch the
TV to the relevant AUX input to display the picture.
AV2 ANALOGUE OUT 2,3,4,5
The MediaServer is a multiroom device allowing you to
listen to different music in up to five different rooms
all at the same time. Each analogue output should be
connected to the input jacks of a pre-amplifier.
AV2 ANALOGUE IN 2
Analogue sources (such as MP3 Players) may be
connected to the MediaServer using this connection.
(Not yet supported in the current software release).
POWER sWITCH
Switches the MediaServer’s power supply on or off.
MAINs
Connect the supplied mains lead to this connector to
provide power to the unit.
ETHERNET
The Ethernet port is used to connect the MediaServer to
a network or high speed Internet connection.
IEEE1394 FIREWIRE
Allows the MediaServer to communicate with supported
Firewire devices.
UsB
Allows the MediaServer to communicate with supported
USB devices.
AV1 VIDEO DVI
Use the DVI connector to connect your MediaServer to a
digital flat-panel television or projector. AV1 is usually
connected to the main television in your home used for
viewing movies.
AV1 VIDEO VGA
The VGA connector is inactive. The DVI connector should
be used for displaying AV1 Video.
Rs232 CONTROL
The RS232 Control port provides serial communication
with supported devices.
AV2 DIGITAL OUT
The digital optical output can be used to transmit high
quality audio to a device with a digital optical input (D/A
converter, A/V amplifier etc.) using an optical fiber cable.
The advantage of using the optical output is that it has
low signal loss caused by other cables and is completely
isolated from the ground loop.
By connecting the coaxial jack to a digital audio
component (D/A converter, A/V amplifier etc.), digital
signals from the MediaServer can be transmitted directly
from the system without first being converted to analog.
These outputs may not be used for making a digital copy
of your media.
AV1 DIGITAL OUT
The digital optical output can be used to transmit high
quality audio to a device with a digital optical input (D/A
converter, A/V amplifier etc.) using an optical fiber cable.
The advantage of using the optical output is that it has
low signal loss caused by other cables and is completely
isolated from the ground loop.
By connecting the coaxial jack to a digital audio
component (D/A converter, A/V amplifier etc.), digital
signals from the MediaServer can be transmitted directly
from the system without first being converted to analog.
These outputs may not be used for making a digital copy
of your media.