![Imerge MediaServer MS5000 User Manual Download Page 47](http://html1.mh-extra.com/html/imerge/mediaserver-ms5000/mediaserver-ms5000_user-manual_2046311047.webp)
43
USER GUIDE
© Copyright Imerge Ltd 2007
Page
MS5000
MediaServer
WARNING MEssAGEs
There are some scenarios in which the MediaServer may
display a warning message on the user interface.
Automatic shutdown
The MediaServer contains sensors that continually
monitor its operating temperature. Should the
temperature exceed its maximum safe operating
temperature, an automatic shutdown will be initiated to
prevent component damage and subsequent data loss.
The user interface will display the following warning
message:
When the countdown is complete, the MediaServer will
automatically shutdown. When the MediaServer is next
switched on, the following screen will be displayed:
If you see either of these screens displayed on the user
interface, you should contact your dealer or installer as
soon as possible.
Hard Disk Failure
Should a fault develop with one of the hard disk drives
in the MediaServer, the following message will be
displayed on the user interface:
If the above message is displayed you should contact
your dealer or installer as soon as possible to organise a
replacement hard disk drive.
LOOK UP FAILURE
If the MediaServer fails to return movie or album
information from the Internet upon inserting a disk into
the tray, there are a number of checks you can perform
to help diagnose the problem.
Navigate to the
Connection Settings
screen via the
following path:
Main Menu
>
Set Up
>
Settings
>
Connection Settings
.
Choose to display
View Assigned Ethernet Settings
.
The user interface will display the following screen:
Press the
ä
Test
key to display the
Ethernet Tests
screen.
Press the
M
Start
key to run a series of quick
diagnostic tests.
If any of the tests fail, check the relevant settings, or
the hardware involved. If you are unable to resolve the
issue, contact your dealer or installer.
•
•
•
•