35
USER GUIDE
© Copyright Imerge Ltd 2007
Page
MS5000
MediaServer
VIDEO OUTPUTs
Your MediaServer is equipped with two independent
video outputs, labelled
AV1
and
AV2
on the rear of
the unit.
AV1
is designed to be connected to the main
television in your home for viewing movies and
AV2
is
routed to the other televisions around your home.
Movies selected to play on output 1 will be displayed on
AV1
and movies selected to play on outputs 2, 3, 4 and 5
will be displayed on
AV2
. The movie soundtrack will be
played via the chosen output.
Note
: If you are unsure how your MediaServer is
configured, contact your dealer or installer.
To select an output
Press the
N
Output
key on the MediaServer remote
control.
Use the
U
or
V
keys to select an output.
Press the
O
Select
key.
You are now in control of the output you have chosen
and any movies you select for playback from the
Video
Library
will be displayed on the chosen output.
Controlling Movie Playback
Whether you are playing music from the
Video Library
or directly from the DVD you can control playback
of the movie using the MediaServer remote control.
The controls are similar to those available with a
conventional dvd player.
When a DVD is selected for playback, the MediaServer
will automatically switch to full screen mode. Depending
on the particular movie, the DVD menu options will
normally be displayed.
Use the
U
,
V
,
S
and
T
keys to navigate the DVD
menu structure.
Use the
O
Select
key to make selections.
To pause play
Press the
h
key on your MediaServer remote
control.
Playback will be paused but the MediaServer will
continue to display the movie in full screen mode.
To stop play
Press the
g
key on your MediaServer remote
control.
The MediaServer will switch from full screen mode
to display the
Now Playing
screen with the movie
minimized to the movie window.
To resume play
Press the
a
key on your MediaServer remote
control.
If the movie is stopped, pressing the
a
key will resume
playback from the same position. If the
Now Playing
screen is displayed, the movie will resume in the movie
window. If the
a
key is pressed from any other screen
in the user interface, the MediaServer will switch to
full screen mode and resume the movie from the same
position.
To skip to the next or previous chapter
Press the
d f
or
e c
key on your MediaServer
remote control.
To seek forwards or backwards
Hold down the
d f
or
e c
key on your
MediaServer remote control for a few seconds and
release the key when the seek begins.
•
•
•
•
•
•
•
•
•
•
Seek will begin at 4 times normal speed and
x4
will be
displayed on the screen, along with the chapter number
and the time position.
To increase seek speed
Press and release the
d f
or
e c
key on your
MediaServer remote control again.
The seek speed will increase to 8 times normal speed and
the
x4
on the screen will change to
x8
.
Repeat the above process to increase the speed further.
To resume normal speed playback
Press the
a
key on your MediaServer remote
control.
Play resumes from the new position.
Resuming a movie on a different output
You can begin watching a movie on one output and then
resume watching the movie on a different output.
For example, if you are watching a movie on output 1:
Press the
g
key on your MediaServer remote
control.
Press the
N
Output
key and to select a different
output (or, more likely, move to a different room in
your home).
Navigate to the
Video Library
and press the
M
Resume Movie
key.
The movie will resume from the same position on the
new output.
•
•
•
•
•
