LLM-1770
Installation and Operation Manual
53
If a later version of firmware is not available, follow the instructions listed
under
Installing the SDI Option
Flash from USB
e
Download the latest firmware from the Harris Broadcast Customer Support website
(
http://support.broadcast.harris.com/
) and load it on a USB memory device.
f
Plug the USB device into the front of the unit.
Press the
SETUP
button and access the
USB Utilities
Flash Update
menu.
If a USB device is not connected to the system, the display will indicate “USB Device
Not Found” for a period of three seconds.
g
Navigate to the LLM-1770_rXXXX.flu FLU file loaded on the USB stick using the up
and down buttons.
h
Once the file has been selected, press the
ENT
button to begin the update.
i
When the update is complete, the unit will automatically power off or restart.
After the update has completed, a flash update log file can be retrieved through
the web interface.
j
Verify that the firmware revision retrieved from the
About
menu matches the
downloaded firmware revision.
Installing the SDI Option
a
Remove the USB memory stick from the LLM-1770 upgrade kit and plug it into the
USB slot located on the front of the unit.
b
Press the SETUP button and access the
USB Utilities
Feature Upgrade
menu.
c
Navigate to the xxxxxxxxx.tvu (xxxxxxxxx is the 9-digit serial number of the unit to
be upgraded) file loaded on the USB stick using the up, down, and
ENT
buttons on
the LLM-1770 front panel.
d
Press the
ENT
button to start the Feature Upgrade.
A message indicating the upgrade status will be displayed.
e
Once the update is complete, the LLM-1770 will automatically power off.
f
Press the power button and wait for the unit to power-up.
g
Verify that the SDI option now appears in the
About
menu.
h
Attach the supplied serial number to the LLM-1770.
About Menu
This selection allows the display of the About screen (see
Figure 4-6
).
Menu Selections
Table 4-11
About Menu
Selection Option
Model Number
Serial Number
Options
Summary of Contents for Videotek LLM-1770
