Imagine Videotek LLM-1770, Installation And Operation Manual

Page: 29 / 122

LLM-1770
Installation and Operation Manual
23
7 CONNECTION
STATUS Indicates whether the web-based control panel is actively
connected to the LLM-1770 unit
If the Web RCU is disconnected, reconnect by refreshing the
page using your web browser’s Refresh function; alternatively,
leave the web RCU page and select the RCU menu bar link
again
8 F1 Used to enable or display the SDI thumbnail (the thumbnail will
not be visible in the RCU display)
*Option required for this feature to work
9 F2 Not implemented
10 LTC PRESENT Longitudinal time code LED indicator; lights green when LTC
time code is present (it has a two second persistence)
11 RUN Run LED indicator; lights green when the LLM-1770 is
collecting loudness information
12 ALARM Alarm LED indicator; lights red when an alarm condition occurs
and remains red until the user clears all alarms
13 EXIT Exit selection button; press and release to leave menu function
selections
14 Navigation Use to navigate menus and select selection options (see
page 35 for an explanation of how to operate the navigation
items)
15 PRG2

Program 2 selection button; press and release to display data
collected from the Aux pair loudness channel analysis

Press and hold to access the Program 2 setup menu
16 RUN Run button; Used to toggle the run / pause state of the
loudness algorithms
17 STAT Status button; used as a quick reference of input present/
mapping indications
18 ALRM

Alarm selection button; press and release to switch to Alarm
display

Press and hold to access the Alarm Setup menus
19 CLR

Clear Display selection button; press and release to invoke
the clear function

If the Alarm display is showing, CLR will clear the alarm
counts

If the Loudness Display is showing, CLR will clear the
collected loudness information for both program 1 and
program 2

Press and hold to access the Clear Setup menu
20 F3 Not implemented
Table 3-2 LLM-1770 Web-Based Panel Controls (Continued)
Key Label Description