Imagine Videotek LLM-1770, Installation And Operation Manual

Page: 39 / 122

LLM-1770
Installation and Operation Manual
33
Loudness Alarms
Loudness alarms can be set for when the loudness level is higher than the target value plus
the range above the desired loudness level, or when the loudness level is lower than target
value plus the range below the desired loudness level. The default alarm parameter
selections depend on the Loudness Mode selection.
To access the Loudness Alarms Setup menu
Press and hold the ALRM button to access the Alarms Setup menu. Use the navigation
buttons to scroll through the menu selections and to select the Loudness Alarm parameters.
For more information on the global Loudness Alarms Setup menu, see page 59.
Dolby Alarms
To access the Alarms Setup menu
Press and hold the ALRM button to access the Alarms Setup menu. Use the navigation
buttons to scroll through the menu selections and to select the Dolby Alarms menu
selections.
To show the available Dolby Alarm menu selections
Press the ENT navigation button.
For more information on the global Dolby Alarms Setup menu, see page 60.
Time Code Alarms
Time code alarm indicates a loss of the LTC input in excess of the duration setting.
To access the Time Code Alarms Setup menu
Press and hold the ALRM button to access the Alarms Setup menu. Use the navigation
buttons to scroll through the menu selections and to select the Time Code Alarm
parameters.
For more information on the global Time Code Alarms Setup menu, see page 60.
General Purpose Interface (GPI) Alarms
The input GPIs have selectable functions. There are selectable functions to allow external
control of the unit or to show an onscreen alarm. Up to four general purpose interface
alarms can be enabled.
To access the GPI Alarms Setup menu
Press and hold the ALRM button.Use the navigation buttons to scroll through the menu
selections and to select the GPI Alarm parameters
For more information on the global GPI Alarms Setup menu, see page 61.