Imagine Videotek LLM-1770, Installation And Operation Manual

Page: 21 / 122

LLM-1770
Installation and Operation Manual
15
1 Determine if you would prefer the flush mount option. If flush mount is preferred, remove
the existing rack ears (ITEM 3) and replace them with ITEM 8 (supplied), using the same
screws to install the replacement rack ears.
2 If you have a BLK-5 blanking plate (ITEM 6) and are only installing one unit in the dual rack
case, follow these steps:
a Slide BLK-5 metal backet plate (ITEM 6 assembly) into desired side of DRT-4A.
b Align the bracket pems with the mounting holes in the rack tray.
c Using 4 #4-40 flat head screws (ITEM 7), secure blank panel assembly into DRT-4A rack
tray.
3 Install the assembled unit in a rack using four 10-32 Phillips head screws and washers (ITEM
4) through the chassis front mounting ears, as shown.
4 Install your unit or units into the rack tray, securing them using the four#6-32×3/8-in.
Phillips head screws (ITEM 5) as shown.
The installation is complete.
5 831131 4 #6-32×3/8-in. Phillips head screws (CMN mounting)
6 BLK-5 1 BLK-5 optional cover assembly (ordered separately)
7 831136 4 #4-40×¼ flat head Phillips head screws
8 P832-0109 2 Metal rack ear, flush mount (optional, installed by
customer)
Table 2-1 Parts for Rack Mounting the LLM-1770 Using the DRT-4A (Continued)
Key Item Number Qty Description