Imagine Videotek LLM-1770, Installation And Operation Manual, Page: 11 / 122

LLM-1770
Installation and Operation Manual
5

Only original parts are used to replace parts relevant to safety (for example, the
power on/off switches, power transformers, and fuses).

Replaceable fuses can be hazardous when live. Before replacing a fuse, disconnect the
AC power source.

Use caution when cleaning the equipment; isopropyl alcohol or similar solvents can
damage or remove the labels.

Observe any additional safety instructions specified in this manual.
Explanation of Symbols
These symbols may appear on Harris Broadcast equipment:
Figure P-1 Safety Symbols Appearing on Harris Broadcast Equipment
This product manual uses the following safety terms and symbols to identify certain
conditions or practices.
Table P-4 Safety Terms and Symbols Appearing in the Product Manual
Symbol Description
WARNING: Identifies conditions or practices that can result in personal
injury or loss of life — high voltage is present. Uninsulated dangerous
voltage within the product’s enclosure may be sufficient to constitute a
risk of electric shock to persons.
CAUTION: Identifies conditions or practices that can result in damage
to the equipment or other property. Important operating and
maintenance (servicing) instructions are included in the literature
accompanying the product.
Certification Labels and Symbol Locations
On Harris Broadcast equipment, certification labels and symbols are located on the back
panel, rear chassis sides, or bottom rear of the chassis. On smaller space-restricted units,
most labels and symbols can be found on the bottom rear of the chassis.