Imagine Selenio X50, Installation And Operation Manual, Page: 70 / 136

Chapter 3
Controls
56

To use the original image’s alpha channel, select the Use the alpha key found with
image check box.

To use a different image for the alpha channel, clear the Use the alpha key found
with image check box, and then click the Open button to select a new file for your
alpha channel.
Note: An alpha channel is an 8-bit layer in a graphics file format that is used for expressing
translucency (transparency). Typically, you define the alpha channel on a per-object basis.
Different parts of an object will have different levels of transparency depending on how
much background you want to show through.
9 Click the Save button in the Static Logo dialog box.
The Save Logo File dialog box opens where you can save your logo as a .mg2 file. Once
you save the logo as a .mg2 file, the logo displays in the LogoCreator workspace.
Figure 3-25 LogoCreator Work Space
Once you create a .mg2 logo you can open the file in LogoCreator, set the logo position,
and modify specific logo attributes. LogoCreator also makes it possible to adjust the noise
and strength of the key signal and apply fade on/off transitions to the logo.
Opening and Previewing an Existing .mg2 Logo
To make position, opacity, or key level changes to the .mg2 logo, follow these steps:
1 In LogoCreator, select File > Open to open the Open Logo File dialog box, or if the Open
Logo File dialog box has already launched, click Open .
2 Using the Open Logo File dialog box, find and select your .mg2 logo file.
3 Click the Open button.
The .mg2 logo displays in the LogoCreator workspace.