Imagine Selenio X50, Installation And Operation Manual, Page: 35 / 136

X50
Installation and Operation Manual
21
Figure 2-11 Add Trap Destination Window
2 Choose the SNMP version that you would like to use for traps.
3 Choose the IP address of that trap destination.
4 Choose the port number. The default is 162, but an administrator can set this to any
number between 0 and 65535.
5 Click Apply . A new line is added in the Trap Destination IP Addresses field.
6 Repeat steps 2 through 5 to add more rows to the window.
7 Click OK to return to the SNMP tab of the Configuration window.
Modifying an SNMP Trap Destination
To modify a trap destination, follow this procedure:
1 In the Trap Destinations IP Addresses list, click on the item you would like to modify.
2 Click the Modify button. The Modify Trap Destination window opens.
Figure 2-12 Modify Trap Destination Window
3 Choose the SNMP version of the traps using the radio buttons at the top of the window.
4 Enter the IP address of that trap destination in the IP Address field.
5 Enter the port number in the Port Number field.
The default value is 162.
6 Click Apply . The selected entry in the Trap Destination IP Addresses field is updated.
7 Repeat steps 2 through 6 to further update the row.
8 Click OK to close the Modify Trap Destination window.