Imagine Selenio X50, Installation And Operation Manual, Page: 40 / 136

Chapter 3
Controls
26
Push Buttons
LEDs When LEDs are lit , the item next to the LED is either selected, enabled, or present. A
flashing LED indicates the item is in an error condition. An LED that remains unlit is either
not applicable, or—in the case of Rate —indicates an output frame rate of 50 . The Dolby
LED illuminates when an AAP is configured as a Dolby E or Dolby Digital encoder, and the
encoder is currently operating.
Table 3-1 Push Button Controls
Name Function
Enter Selects or “takes” an option or value in a parameter
Exit Exits from one level in the parameter tree to a higher lever in the tree
Default Resets all of the X50 parameters to their default values, and flashes when
you have selected a default value for a parameter (to reset all of the
parameters using this control, you must press and hold the button for one
second)
Remote Enables the controls to operate other remote X50, X75, and X85 units (to
activate this control, you must press and hold the button for one second)
Status

Displays the current machine status and/or error conditions (the VFD
switches back to
control mode to display the menu structure when you
press the Enter or Exit button)

Hold the button for one second to obtain a Faults list. (Before the alarms
in the list are operational, you must enable them, either in the Faults list,
or in the X50 software GUI. To enable an alarm in the Faults list, select
the line, press the Enter button, and then select Enable .)

If the square beside the item is filled, the alarm has been triggered.
Help Displays a brief description of a selected parameter’s function (hold the
button for one second to view the control panel’s display options, including
intensity, backlight, screen saver, and Lock Panel*)
*The Lock Panel feature prevents the enabling of a function by accidental activation of a button.
Press
D Exit to escape this feature.
Table 3-2 Left-Side LEDs
Name Meaning when Lit
Power 1 and Power 2 Indicates which power supplies are in use
Mem Active Shows that the internal or SD card memory is in use; normal
operation of the X50 may be interrupted
Audio Card Indicates the presence of an advanced audio module (future use)
Upgrading Indicates the X50 software is being upgraded; normal operation is
interrupted