manualshive.com logo in svg

Imagine communications Selenio VMG-14+, Hardware Setup Manual

The Imagine Communications Selenio VMG-14+ is a cutting-edge video processing device that enables seamless content delivery. To set up this advanced hardware, refer to the comprehensive Hardware Setup Manual. Download this manual for free from manualshive.com to get detailed instructions, optimizing your experience with this state-of-the-art product.

Share
Download
background image

Selenio

TM

 VMG-14+ Hardware Setup Guide

8

List

 

of

 

Tables

Table 1: Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 2: Contact Information for Product Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 3: VMG-14+ Chassis Modules and Components  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Table 4: Shelf Control Manager—Front Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 5: RJ-45 Port Pinouts—VMG-14+ SCM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 6: Fan Tray LEDs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table 7: NPM Models  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 8: NPM Front Panel LED Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 9: NPM Serial Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Table 10: VMG-14+ System Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Table 11: VPM Front Panel LEDs   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table 12: TCM, TCM2, TCM2+ Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 13: AMP Front Panel LEDs   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 14: AC Power Supply LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table 15: DC PEM LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Table 16: DC Ground Connection Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table 17: DC Power Connection Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Table 18: Hot Swap LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Table 19: Hot Swap LED Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table 20: FRU Reference for VMG-14+  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Table 21: Application Modules  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Table 22: Input/Output interfaces  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table 23: System and Component-Level Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table 24: Regulatory Standards Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Table 25: Safety Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Table 26: Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 27: Weight Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 28: DC Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table 29: AC Power Input Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table 30: AC Power Supply Module Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table 31: Environmental Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table 32: EN55024 Referenced Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Table 33: EN550-22 Referenced Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Table 34: VCCI Referenced Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Summary of Contents for Selenio VMG-14+





























































































Reviews:

No comments

Related manuals for Selenio VMG-14+

Ursalink UG87-In Quick Start Manual preview
UG87-In
Brand: Ursalink Pages: 23
ProSoft Technology ProLinx DNPS User Manual preview
ProLinx DNPS
Brand: ProSoft Technology Pages: 86
RTA 460MRSBMS Product User Manual preview
460MRSBMS
Brand: RTA Pages: 73
Yeastar Technology TA3210 User Manual preview
TA3210
Brand: Yeastar Technology Pages: 66
Elpro Technologies 105U-G User Manual preview
105U-G
Brand: Elpro Technologies Pages: 160
RTA 490NBX-NNA1 Product User Manual preview
490NBX-NNA1
Brand: RTA Pages: 43
Ubee DDW366 Safety And Installation Manual preview
DDW366
Brand: Ubee Pages: 7
MICROTRONIX access 1000 series User Manual preview
access 1000 series
Brand: MICROTRONIX Pages: 93
ZKTeco F16 Quick Start Manual preview
F16
Brand: ZKTeco Pages: 20
Alcatel-Lucent OmniAccess 700 Brochure preview
OmniAccess 700
Brand: Alcatel-Lucent Pages: 2
Eaton INDGW-X2 User Manual preview
INDGW-X2
Brand: Eaton Pages: 273
QEI ePAQ-9100 Manual preview
ePAQ-9100
Brand: QEI Pages: 47
Davolink DV-201DM User Manual preview
DV-201DM
Brand: Davolink Pages: 73
PR Elecronics 4801 Installation And Connection Manual preview
4801
Brand: PR Elecronics Pages: 24
evertz 78908MG-10GE2 User Manual preview
78908MG-10GE2
Brand: evertz Pages: 52
Technicolor TG789vac v2 Setup And User Manual preview
TG789vac v2
Brand: Technicolor Pages: 103
EnOcean USB 300 Manual preview
USB 300
Brand: EnOcean Pages: 18
Lucent Technologies PacketStar PSAX 20 User Manual preview
PacketStar PSAX 20
Brand: Lucent Technologies Pages: 400

Brands by name

Popular brands

Load more brands