R E M O T E O P E R A T I O N S
Remote Configuration
26
LDC-3926339
C H A P T E R
3
If multiple parameters are expected, they must be separated with commas. For
example, to set the Steinhart-Hart constants (C1, C2, and C3) on a TEC module,
the following command may be sent:
TEC:CONST 1.111, 2.004, 0.456
The LDC-3926 uses a terminator of <NL><^END> (new line EOI). For users
whose GPIB driver defaults expect a carriage return in the terminator,
<CR><NL><^END>, the "TERM" command may be used for convenience (see
TERM
on page
50
).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com