MDtest (100-140 V) - User’s Manual
2
Description of the instrument
Features and highlights:
•
test results can be saved under an ID number which is unequivocally assigned
to the respective DUT (barcode, RFID chip)
•
the test structures created at the PC software can be loaded into the MDtest
•
measurement data saved to the test instrument can be imported to PC software
via the USB port and reports can be generated
•
user-defined test sequences created at the PC software
•
user-defined report templates created at the PC software
2.2
Terminals
1. Test Socket for connection of tested appliance’s power supply cord
2.
PE
– terminal for connecting the exposed conductive part of the tested appli-
ance (the terminal is connected to the PE terminal of Test Socket
1
)
3.
I
TOUCH
2k
Ω – touch leakage current test terminal
4.
R
ISO
/
I
ALT
– insulation resistance / alternative leakage current test terminal
5.
PAT
– terminal for connecting the patient parts of tested appliance
6.
R
PE
– earth bond test terminal
7.
PE
MAINS
– terminal connected with PE of mains
8. USB - socket type A for connection USB 2.0 Full Speed HID (Human Interface
Device), e.g. barcode scanner
9. USB – socket type B, PC connection
10. EXT input - current clamp / three-phase adapter / other adapters connector
11. Power supply cord
WARNING
•
Do not connect any external voltage to any terminal or connector.
The only exception is the power supply cord
11
which is intended
for powering the MDtest from the 127 V / 50 or 60 Hz mains
outlet.
•
Max. load on Test Socket
1
is 16 A (limited in time).
•
Use original accessories only.
•
Do not connect any external voltage between R
PE
terminal and
the PE in Test Socket
1
or PE terminal.
c
2018 ILLKO, s.r.o.
www.illko.cz
Page 9
