MDtest (100-140 V) - User’s Manual
4
Measurements
4.7.3
Lead to ground (application part) leakage current (direct method)
- I60601Pat
Figure 16: I60601Pat measurement
Outlet conditions:
- Normal Polarity
- Reversed Polarity
- Normal Polarity, Open Neutral
- Reversed Polarity, Open Neutral
- Normal Polarity, Open PE
- Reversed Polarity, Open PE
Procedure:
•
Press the
[* UTIL]
key and release it. Then press the
[3]
key and release it.
•
If the measurement with open N can be performed, press the
[OpenN]
key.
•
If the measurement with open PE can be performed, press the
[OpenPE]
key.
•
Press the
[Default]
,
[OpenN]
or
[OpenPE]
keys repetitively in order to
measure with L-N reversal. Symbol L-N reversed is displayed.
•
Connect the tested appliance: plug in its mains plug into Test Socket
1
. Plug
the applications parts into the
PAT
or
PE
MAINS
terminals.
•
Press the
[TEST]
key.
•
Switch on the tested appliance’s mains switch.
•
The HOLD function can be used (press the
[
H
]
key).
•
Switch off the tested appliance’s mains switch.
•
Finish the measurement (see chapter 4.2.1).
c
2018 ILLKO, s.r.o.
www.illko.cz
Page 37
