MDtest (100-140 V) - User’s Manual
4
Measurements
4.7
Leakage currents according to IEC EN 60601-1
WARNING
Leakage currents (according to EN 60601-1) are measured by the same
measurement methods as leakage current, which is specified in chapter
4.5.2. Therefore, all safety warnings and operating instructions apply
for these measurements as to those measured leakage currents listed in
chapter 4.5.2.
•
Some measurements are possible to perform with the DC com-
ponent measurement (see chapter 6.5.2).
•
To perform the SFC (Single Fault Condition) – the Neutral or
PE conductor is interrupted. During the measurement a warning
beep is emitted.
c
2018 ILLKO, s.r.o.
www.illko.cz
Page 34
