Ikra ESN 1000, Operating Instructions Manual

Page: 14 / 48

GB-1
1. Technical Details
Model ESN 1000
Rated Voltage V~ 230
Nominal Frequency Hz 50
Nominal Consumption W 1000
No-load Speed min
-1
7500
Cutting Width cm 38
Line Diameter mm 1,6
Line Length m 2 x 5
Line Feed automatic
Weight kg 4,6
Sound Pressure Level dB (A) 85,6 (acc. to prEN ISO 10518)
[K 3,0 dB(A)]
Vibration m/s
2
10,2 (acc. to prEN ISO 10518)
[K 1,5 m/s²]
We reserve the right to make changes to the technical specifications.
Protection class II
The electric lawn trimmer is constructed in line with the regulations with EN 60335-2-91 and prEN ISO 10518 and fully
comply with the provisions of the German Equipment and Product Safety Act.
ENGLISH
Electric Lawn Trimmer
2. General Safety Instructions
Machine noise Information regulation 3, GPSGV the
noise pressure level at the place of work can exceed
80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Attention: Noise protection ! Please observe the
local regulations when operating your device.
Attention: Using electric power tools, you must
observe following fundamental safety instruc-
tions to protect yourself against electric shock,
against danger of injuries and danger of fire.
Read all these instructions before using the tool
and observe them. Keep these safety instructions
at a safe place.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless, use
of the machine can involve risks to the user or third
persons, and can cause damage to the machine or
other objects.
Use the machine in a safety conscious manner for
suitable applications and in technically perfect con-
dition only and according to the operating instruc-
tions! Immediately rectify or have any faults rectified
which could adversely affect safety!
Read the instruction manual carefully. It is important
that you fully understand and observe the safety
precautions and warnings before starting and using
your tool for the first time. Careless or improper use
of any lawn trimmermay cause serious or fatal injury.
Observe all applicable safety regulations, standards
and ordinances. Please familiarise yourself with the
machine before the first use.
3. Application
The machine is exclusively intended for cutting grass,
weed and decorative lawn, i.e. lawn edges. Any other
use or use going beyond that, such as the cutting of
brushwood and hedges or large areas of lawn, is con-
sidered improper use. The manufacturer / supplier is not
liable for damages resulting from such use. The risk is
borne by the user alone. A proper utilisation also includes
the observance of the operating manual and the compli-
ance with the conditions of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
4. Safety Instructions
A. General Instructions
1. Your electric tool is a high-speed, fast-cutting
power tool. The electrical connection and cutting
tool are potential sources of danger. Therefore,
special safety precautions must be observed to
reduce the risk of personal injury.
2. Always switch off the tool and disconnect the
plug from the power supply before carrying out
any maintenance or repair work on the unit.
Always unplug the tool if you leave it without
supervision.
Translation of the original Operating Instructions