7-5-3.Condition
Click Condition 1
～
3 on Menu, below setup screen is displayed.
The setup procedure of Event and Schedule details shall be referred 8-2-2. Condition 1.
Service
This shows what service is for this condition.
Module ID
Module ID for current setup (Fixed 0)
Camera ID
Camera ID for current setup.
Enable / Disable
Enable:To use this condition.
Disable:Not to use this condition.
Always
This condition applies all the time.
(Schedule or Event is not usable)
Schedule Only
Use Week, Time and Date in Condition parameter.
If none of weekdays is set, it is activated every day.
Event Only
It is activated only any of the following events occurs.
(Sensor, Motion Detection, Sever Booting)
Schedule & Event
It is activated above Schedule and Event conditions.
After finished above setting, click Save button to apply the setting data.
If click Back button, new setting data will be cancelled and the screen will be back to previous
screen display.
46
