Below is explanation for setup done screens e.g.
○
Condition1:The recording is done by
every Saturday and Sunday of week.
And it is controlled Schedule setup
contents and Event occurred.
○
Time(hh:mm):In this case, not setup it,
this means all day 24hours scheduled.
○
Week
（
Days
）
):In this case, not setup it,
this means all week scheduled.
○
Date
（
mm/dd
）
In this case, not setup it,
this means all months scheduled.
○
When it is clicked Save button, then
below Recording Configuration Screen
is displayed. It can be confirmed the
setup results of Recording Condition.
○
If click Back button, new setting data
will be cancelled and the screen will be
back to previous screen display.
○
When it is clicked Save button on
above Condition1, Recording
Configuration Screen is displayed as
right screen.
○
Condition1:This field shows ,SUN,SAT
schedule recording, and M1(Motion
Detect 1), D1(Alarm Sensor 1) Event
recording setting.
Also this setting condition is shown
graphically on table of 24hours/Weekly.
○
when it is needed to record, to select
Enable radio button of Recording
Service. If not, select Disable redio
button.
○
Pre-Alarm and Post-Alarm fields can
be set recording conditions for before
and after of Event.
The detail is referred to
8-2-3.Pre-Alarm & Post-Alarm Configuration Example.
56
