Ikegami IPD-BX11 Instruction Manual Download Page 2

Page: 2 / 74

This manual explains how to configure the following cameras through Network from PC.

●IPD-BX11(Box-type IP Network Camera) without Audio, SD card slot, and DI/DO functions.

●IPD-DM11(Dome-type IP Network Camera) with Audio, SD card slot, and DI/DO functions.

●IPD-VR11(Vandal Resistant Dome-type IP Network Camera)with Audio, SD card slot, and DI/DO

functions.

This manual can be downloaded from the following URL:

http://www.ikegami.co.jp/en/products/download/security.html

Concerning installation and the set-up procedure for the camera, please see the Operating procedure and

Camera Installation on the Instruction Manual (Basic) is supplied with the camera.

To browse PDF files, Adobe Reader English Edition is required. Please download and install the

latest edition from the Adobe Systems site.

●Microsoft Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the USA

and other countries.

●Adobe Reader is a registered trademark of Adobe Systems in the USA and other countries.

●Other corporate names and proprietary names are trademarks or registered trademarks of their

corporations.

●The symbols ® and

™ are not included in the text.

●Microsoft product screen shots reprinted with permission from Microsoft Corporation.

●To see camera images, "Network Camera Viewer" software is prepared in addition.

Please contact your dealer for this software "Network Camera Viewer".

Concerning software for viewing and tool for network connection

Concerning trademark and registered trademark

Concerning the Instruction manual (Application)

Summary of Contents for IPD-BX11











































































Search results

Summary of Contents for IPD-BX11

Reviews:

Related manuals for IPD-BX11

Brands by name

Popular brands

Ikegami IPD-BX11, Instruction Manual

Search results

Summary of Contents for IPD-BX11

Reviews:

Related manuals for IPD-BX11

Brands by name

Popular brands