6-3-4.PrimaryStream
と
SecondaryStream
Click either Primary Stream or Secondary Stream item on Menu, below setup screen is displayed.
H.264(VBR Mode)
H.264(CBR Mode)
M-JPEG
Factory default setting is H.264 for Primary Stream, M-JPEG for Secondary Stream.
Camera
Name
Print in Camera name
Enter up to 21 alphanumeric characters or up to 10 Unicode.
Rate
Control
Mode
H.264 VBR(Variable Bit Rate)Mode
Video is encoded with selected image quality and GOP. Bit rate is different each
encoded video frame.
H.264 CBR(Constant Bit Rate)Mode
Video is encoded with selected Bit rate and GOP. Bit rate is constant each encoded
video frame, but encoded video quality is not stable related camera captured image.
Image
Quality
H.264 VBR(Variable Bit Rate)Mode and M-JPEG
Select between Low Compression / Highest / High / Normal / Low / Lowest .
Low Compression side is realized high quality streaming video, but it is required
higher Bandwidth. Lowest side is required lower Bandwidth, but it is given decreased
quality image
Bit Rate
Control
H.264 CBR(Constant Bit Rate)Mode
Select the bit rate between 10Mbps from 32Kbps
。
GOP
Structure
Set the I frame distance between 1 to 64. This is filled with P-frames.
After finished above setting, click Apply button to save. When click the Default button, the
setting will be set previous setting data. If click Back button, new setting data will be cancelled and
the screen will be back to previous screen display.
31
