15
10. Installation
Connecting the LAN cable
NOTE
The IP addresses used in the figure are setting examples. You should actually set the
correct values according to the network environment you are using.
In particular, do not connect to the Internet with the IP address used in the figure. The
correct setting value should be obtained from the network manager or the ISP (Internet
Service Provider) for which you are contracted.
10-1. Installing on the same network
This is an example of installing this equipment and the IDE-10 on the same network. Be sure to
correctly set the IP address and subnet mask.
LAN
H.264 Network Encoder
MODEL
IEN-10
SD CARD
P S E
H.264 Network Decoder
MODEL
IDE-10
SD CARD
P S E
IEN-10
Camera
Monitor
Example (IEN-10)
IP address
: 192.168.1.100
Subnet mask : 255.255.255.0
Example (IDE-10)
IP address
: 192.168.1.150
Subnet mask : 255.255.255.0
IDE-10
Summary of Contents for IEN-10
Page 29: ......
