Ikegami IEN-10, Instruction Manual

Page: 9 / 30

6
4-2. Rear panel
AUDIO
IN OUT
AC24V
50/60Hz 〜
DC12V
CLASS2
＋ −
ETHERNET
RS-232C(DCE)
VIDEO IN LOOP OUT OPTION
RS485
ACT LINK
IO2 IO1
DC12V
⑦ ⑧ ⑨ ⑩ ⑪
① ② ③ ④ ⑤ ⑥
① VIDEO IN .................... Video signals from camera, etc. are input here. It incorporates the
automatic termination function.
②
LOOP OUT ................. This is a throughout terminal for VIDEO IN signals. If a coaxial
cable is connected here, the termination function will be
automatically cancelled.
③
OPTION ...................... Normally not in use.
④ AUDIO IN .................... Audio input.
⑤
AUDIO OUT ................ Audio output. (not in use)
⑥ Grounding terminal ..... Ground equipment for safety’s sake.
(special screw)
⑦
ETHERNET ................ Wire for LAN cable (category 5e or higher). Operates with PoE.
⑧ RS-232C ..................... RS-232C communications possible (DCE).
⑨ Terminal block 1
IO1 ................ Normally open non-voltage input or open collector output. Possible to
set functions on input/output setting screen. For details, see the
Instruction Manual (Application Instructions).
IO2 ................ Same as IO1.
RS-485 .......... Communications possible with Ikegami I-LAN compatible
equipments.
⑩
Terminal block 2 ......... Input of DC12V or AC24V (normally not in use). Do not
simultaneously use the power source in item ⑪ (AC adapter). Do
not input AC24V simultaneously with PoE.
* This installation should be made by a qualified service person and
should conform to all local codes.
⑪
Power source .............. The installation should be made by a qualified service person and
should conform to all local codes. Do not use simultaneously with
terminal block 2 in item
⑩
.
Use an AC adapter attested in UL1310 and CSA-C22.2 No.223.