17
10-3. Installing in separate locations with use of Internet and WAN
This is an example of installing this equipment and the IDE-10 using the Internet and WAN for
installation in different locations. Be sure to correctly set the IP address and subnet mask, and
the gateway IP address.
This equipment uses RTSP (TCP) and RTP/RTCP (UDP) for transmission and reception of
video and audio. Carry out setting of the router firewall and port forward for communications with
these protocols.
For details consult the Instruction Manual (Application Instructions) and the manual of the router
you are using.
LAN1
LAN2
H.264 Network Encoder
MODEL
IEN-10
SD CARD
P S E
H.264 Network Decoder
MODEL
IDE-10
SD CARD
P S E
Router
Monitor
Router
Modem, etc.
Example (IEN-10)
IP address
: 192.168.1.100
Subnet mask
: 255.255.255.0
Gateway
: 192.168.1.1
HTTP port
: 80
Example (Router)
LAN1 side
IP address : 192.168.1.1
Example (Router)
LAN2 side
IP address
: 192.168.1.1
Subnet mask : 255.255.255.0
Modem, etc.
Internet
・
WAN
Example (IDE-10)
IP address
: 192.168.1.150
Subnet mask : 255.255.255.0
Gateway
: 192.168.1.1
IEN-10
Camera
IDE-10
Summary of Contents for IEN-10
Page 29: ......
