16
10-2. Installing on different networks
This is an example of installing this equipment and the IDE-10 on different networks. Be sure to
correctly set the IP address and subnet mask, and the gateway IP address.
This equipment uses RTSP (TCP) and RTP/RTCP (UDP) for transmission and reception of
video and audio. Carry out setting of the router firewall and port forward for communications with
these protocols.
For details consult the Instruction Manual (Application Instructions) and the manual of the router
you are using.
LAN1
LAN2
H.264 Network Encoder
MODEL
IEN-10
SD CARD
P S E
H.264 Network Decoder
MODEL
IDE-10
SD CARD
P S E
Example (Router)
LAN1 side
IP address
: 192.168.1.1
Subnet mask : 255.255.255.0
LAN2 side
IP address
: 192.168.2.1
Subnet mask : 255.255.255.0
IEN-10
Router
Camera
IDE-10
Monitor
Example (IEN-10)
IP address
: 192.168.1.100
Subnet mask : 255.255.255.0
Gateway
: 192.168.1.1
Example (IDE-10)
IP address
: 192.168.2.150
Subnet mask : 255.255.255.0
Gateway
: 192.168.2.1
Summary of Contents for IEN-10
Page 29: ......
