Ikegami IEN-10, Instruction Manual

Page: 7 / 30

4
2. Outline
This equipment is a PoE-compatible network encoder (box-type) that can compress both image
and voice signals from conventional analog surveillance cameras into digital data to be delivered
over a network. It uses the state-of-the-art H.264/AVC technology to compress image data for
allowing high-quality images to be delivered at a highly efficient rate. By connecting this
equipment to an existing surveillance camera system, the system networking can be
accomplished with ease.
The equipment incorporates an outdoor-responsive-type motion-detection function, which is not
sensitive to disturbances such as rocking vibrations of tree leaves, etc. to provide for an alarm
system with least false alarms.
3. Features
(1) Operates with high picture quality, high compression
With its high profile H.264 technology, this equipment can deliver high-quality images even
though at high-compression rates of 64kbps ~ 8Mbps.
(2) Outdoor-responsive-type motion detection
The equipment employs the outdoor-responsive-type motion-detection function not
sensitive to rocking vibrations of tree leaves etc. to provide for an alarm system with least
false reports.
(3) Alarm functions
The Pre-alarm and post-alarm functions are incorporated to record the images preceding
and following an alarm that has occurred.
(4) Recording images on SD cards
Images can be recorded and stored on SD cards.
(5) I/O function
Possible to carry out transmission/reception of contact signals via networks between this
device and network encoders during connection.
(6) External device control function
Control data received via the network can be output with the RS-232C and RS-485 to control
external devices. In addition, the control data input from external devices using the RS-232C
and RS-485 can then be transmitted via the network.
(7) Maintenance
It is possible via the network to update the software or conduct maintenance by means of
self-diagnoses.
(8) PoE-Compatible
In environments where it is difficult to obtain power, it is possible to supply power via an
Ethernet cable using a hub, etc. that operates with PoE (power over Ethernet).
(9) Displaying images using the dedicated viewer
Images can be displayed by using the dedicated viewer software.