Ikegami HDL-45E, Operation Manual

Page: 72 / 84

5 - 44 5. OPERATION
② When [C.TEMP SETTING BLUE] is selected, the menu is displayed as shown below.
Changes the B ch side correction range of [PRESET] in [ATW MODE].
C
．
TEMP SETTING BLUE
QUIT
BLUE LIMIT AUTO SET
ON
BLUE LIMIT CONTROL 0
BLUE LIMIT INIT OFF
PUSH SET
→ START
(ON, OFF)
(-100 to +100)
(ON, OFF)
・
BLUE LIMIT AUTO SET
1. Sets ATW MODE to PRESET, and shoots the blue subject for matching.
2. Sets [BLUE LIMIT AUTO SET] to ON, and executes [PUSH SET START].
3. When COMPLETE is displayed, the color temperature (Blue) of ATW allowed is
changed within the range of color temperature of the subject.
・ BLUE LIMIT CONTROL
Enables the fine adjustment of the ATW allowable range.
By + direction, enables to broaden the ATW allowable range of the color whose color
temperature is low (Blue).
By - direction, enables to narrow the ATW allowable range of the color whose color
temperature is low (Blue).
・ BLUE LIMIT INIT
Setting ON makes the ATW allowable range of the color whose PRESET color
temperature is low (Blue) to be set back to the factory setup.
③ When [ATW REFERENCE] is clicked, the menu is displayed as shown below.
ATW REFERENCE
QUIT
ATW RED REFERENCE
0
ATW BLUE REFERENCE 0
(-100 to +100)
(-100
to
+100)
・ Adjusts the color converged when the color whose color temperature is low (Red) is
matched at [ATW RED REFERENCE]. (-100 to +100)
・ Approx. ± 10 ％ of the red level can be adjusted by ± 100 adjustment.
・
Adjusts the color converged when the color whose color temperature is low (Blue) is
matched at [ATW RED REFERENCE]. (-100 to +100)
・
Approx.
±
10
％
of the blue level can be adjusted by
±
100 adjustment.