Ikegami HDL-45E, Operation Manual

Page: 50 / 84

5 - 22 5. OPERATION
[AWB CC CONTROL]
Sets the mode for which the ECC filter is automatically switched when AWB is performed.
• ON: The ECC filter is automatically switched.
• OFF: The ECC filter is not automatically switched.
Notice
AWB CC CONTROL is the function to perform AWB again by switching the ECC filter
automatically when the color temperature of the subject does not fit with the ECC
filter position of the camera. This enables to adjust the white balance within all the
color temperature ranges with one operation of AWB.
[BLACK BALANCE]
Performs APS (Auto Peak Shading) and ABS (Auto Black Shading).
• APS: Performs Auto Peak Shading and Auto Black Shading.
• ABS: Performs Auto Black Shading.
When APS and ABS are selected, “PUSH SET
→
START” blinks on the lower side of the menu screen. When the MENU
switch is pressed again at this time, APS and ABS are performed. When you do not perform APS and ABS, rotate the
MENU switch and move to another item.
Notice
Auto Peak Shading is the function to adjust the black level on the edge of the screen
automatically. It takes several minutes to complete APS.
■
AUTO IRIS SET
AUTO SETUP MODE
QUIT
IRIS SET MODE
OFF
IRIS LEVEL SET +10
PEAK RATIO SET +10
IRIS GAIN 75
IRIS SPEED 50
IRIS LIMIT F22
LENS ADJUST OFF
(OFF, ON)
(-100 to +100)
(-100 to +100)
(0 to 100)
(0 to 100)
(F22, F20, F18, F16)
(OFF, ON)
IRIS SET MODE : ON : Enables the adjustment of AUTO IRIS.
OFF : Prohibits the adjustment of AUTO IRIS.
IRIS LEVEL SET : Adjusts the video level where AUTO IRIS converges.
PEAK RATIO SET : Adjusts the AUTO IRIS response. The larger the value is, the more
sensitive to a small light source the camera gets.
IRIS GAIN : Adjusts the sensitivity of AUTO IRIS.
IRIS SPEED : Adjusts the operation speed of AUTO IRIS.
IRIS LIMIT : Select a limit value of the iris that can be closed by AUTO IRIS. The
iris can be closed up to the F value to be selected.
LENS ADJUST : Used to adjust the combination with lenses. Normally, this item is
not used.