Ikegami HDL-45E, Operation Manual

Page: 24 / 84

4 - 4 4. INSTALLATION and CONNECTIONS
4.4 Connection of Power Supply
This section explains how to connect the power supply.
Power supply source for the camera is +12V(allowable range : +11v to +16v).
CAUTION
Before connecting the power, verify that the POWER switch of the
camera is turned “OFF.”
DC IN DC IN
G.L
COMM
2 1
SDI OUT
ABB
AWB GAIN CAM
BAR
WARNING
POWER
MENU
M
H
L
EXT SYNC
MON
AC pack
DC POWER cable
DC IN connector
DC OUT
connector
AC outlet
AC connector
POWER
switch
POWER
indicator
POWER switch
Camera rear view
1. Connect AC connector to an AC power outlet to which commercial power is supplied.
2.
Plug the DC cable into the DC OUT connector on the AC pack and push the DC cable into the DC IN connector on
the rear of the camera.
3. Turn ON the POWER switch on the front of the AC pack.
4.
Turn ON the POWER switch on the rear of the camera. Lights up during power on.