Ikegami HDL-45E, Operation Manual

Page: 33 / 84

5. OPERATION 5 - 5
GAMMA SELECT
QUIT
MODE
STEP
NORMAL
0.45
(NORMAL, CINE1, CINE2)
(0.45, 0.40, 0.35, OFF)
MODE : Switches gamma type.
NORMAL : Normal gamma
CINE1 : CINE gamma type1
CINE2 : CINE gamma type2
STEP : Switches gamma step.
Notice
When MODE is switched to CINE1 and CINE2, KNEE_POINT and
KNEE_SLOPE change with the gamma curve. If the setting remains
a t t h e n o r m a l , K N E E _ P O I N T a n d K N E E _ S L O P E b e c o m e l o w e r
w h e n M O D E i s s w i t c h e d t o C I N E 1 a n d C I N E 2 , t h e n e c e s s a r y
d y n a m i c r a n g e b e c o m e s h a r d t o g e t . I n t h a t c a s e , a d j u s t
KNEE_POINT and KNEE_SLOPE from a remote controller according
to the type of CINE gamma. Moreover, return KNEE_POINT and
KNEE_SLOPE to former value when you return it from CINE1 and
CINE2 to NORMAL.
■
FILTER SELECT
1. FILTER SELECT contains two items: ND and CC. To select the desired item, turn and press the MENU select switch while
the item is blinking.
2. The blinking cursor moves to the mode at the right of the selected item. Turn the MENU select switch to set it to the value
to be set and press it while the mode is blinking.
3.
To return to the menu screen of “MENU PAGE1,” select “QUIT” and press the MENU select switch while “QUIT” is
blinking.
FILTER SELECT
QUIT
ND
CC
1
B(5600) (
1, 2, 3, 4
)
( A ( 3200 ) , B ( 5600 ))
ND : Switches over ND filter.
CC
: Switches over electric color temperature (ECC) filter.
CAUTION
The values for ND and CC vary depending on “ON” or “OFF” for
SINGLE FILTER MODE in the engineer menu.