Ikegami HDL-45E, Operation Manual

Page: 62 / 84

5 - 34 5. OPERATION
[ Hierarchical Structure of the Engineer Menus ]
NEXT PAGE
SMOOTH KNEE SETUP
HI-LIGHT DTL SET UP
ND FILE
AVC SETUP
-
QUIT
SMOOTH KNEE
TEST PULSE
POINT1
SLOPE1
POINT2
SLOPE2
POINT3
SLOPE3
LOAD INT
QUIT
HI-LIGHT DTL
GAIN
LIMIT
QUIT
FUNCTION
MODE
AVC DISPLAY
MODE
PRESET DAY FILE
DAY FILE CENTER
PRESET NIGHT FILE
DAY DETECT AREA
NIGHT DETECT AREA
GAIN LIMIT
D/N TIME
D/N CHANGE LEVEL
F LIMIT
F2.8
F VALUE
-
-
OFF, TYPE1, TYPE2, TYPE3
ON, OFF
-
-
-
-
-
-
-
-
ON, OFF
0 to +100
-100 to +100
ON, OFF
-
ENABLE, DISABLE
QUIT
ON, OFF
MODE1, 2, 3, 4, 5
MODE1, 2, 3, 4, 5
MODE1, 2, 3, 4, 5
AREA1, 2, 3, 4, 5, 6, 7
AREA1, 2, 3, 4
+12, +18, +24, +30,
+36, +42, +48, +54dB
FAST, STANDARD
TYPE1, 2, 3, 4
QUIT
-40 to +70
-
-
-
TYPE1
OFF
-
-
-
-
-
-
-
-
OFF
-
-
ON
-
ENABLE
OFF
MODE3
MODE3
MODE2
AREA4
AREA4
+18dB
STANDARD
TYPE1
F2.8
Moves to ENGINEER PAGE2.
Moves from the sub menu to the main menu.
Selects the SMOOTH KNEE type.
Turns on/off the test pulse for setting SMOOTH KNEE.
Sets the SMOOTH KNEE curve.
The entire curve can be determined by setting each one of the three
points of the curve.
Each curve of TYPE1, TYPE2, or TYPE3 can be set.
Initializes the data to the factory settings.
Moves from the sub menu to the main menu.
Turns on/off highlight DTL.
Sets highlight DTL GAIN. Increasing the GAIN value
increases edges to be added to high luminance parts.
Sets the clip point of highlight DTL edge. Controls the amplitude of the
edge.
Offsets the color temperature for each ND filter when set to ON.
This corrects the white balance deviation which is caused by ND filter
incorporation. No offset is performed when set to OFF.
Moves from the sub menu to the main menu.
Selects whether the operation of the AVC function is valid or invalid.
DISABLE is recommended for the indoor operation selection. ENABLE
is recommended for the outdoor operation selection.
Moves to AVC SETUP menu.
Performs the character display at the AVC operated condition to the
main line output.
Display items from the left: ND FILTER No., CC FILTER No., Iris F
value, operated condition, (“D”ay or “N”ight), gain display, AWB file
(“A”ch/“B”ch/A“T”W coupled), NIGHT MODE output No., DAY MODE output No.
Selects the operation pattern of DAY mode.
Fixes the center position of the volume.
Selects the operation pattern of NIGHT mode.
Selects the photometry area of DAY mode.
Selects the photometry area of NIGHT mode.
Sets the limit value of NIGHT mode gain increase.
−
−
Moves to AVC SETUP menu.
The value of setting F value for entering NIGHT mode.
F value for entering NIGHT mode.
****** ENGINEER PAGE1 (1/2) ******
MAIN MENU SELECT
SUB MENU FUNCTION
DEFAULT