Ikegami HDL-45E, Operation Manual

Page: 27 / 84

4. INSTALLATION and CONNECTIONS 4 - 7
Notice
•
When RCP-50B is connected, following controls can be performed.
•
To use as a single remote controller, put it in the dedicated case
(optionally available).
This enables direct connection to the camera.
ON/OFF Control Items
Control
ABB
AWB
AUTO BLACK SHADING
AHD (Auto Hue Detect)
AUTO IRIS
AUTO KNEE
AWB MEMORY OFF, A, B
AVC
NIGHT MODE 1, 2, 3, 4
AVC FILTER HOLD
ATW
BARS
BLACK PRESS OFF, −3%, −5%, −7%, −9%, −11%
BLACK STRETCH OFF, +3%, +5%, +7%, +9%, +11%
BLACK SHADING
CAL OFF,100%,200%
CAP
CC FILTER (ECC) 3200K , 5600K
CHROMA
COLOR SATURATION
COLOR CORRECTION
DIGITAL EXTENDER
MAGINIFICANT
×
1.5,
×
2,
×
3,
×
4,
×
6,
×
8,
×
10
DTL
FLARE
GAIN −6, −3, 0, +3, +6, +9, +12, +18,
+24, +30, +36, +42, +48, +54dB
GAMMA OFF, 0.35, 0.40, 0.45
HI-LIGHT DTL
KNEE AUTO , MANUAL
LENS EXTENDER IND.
LENS FILE OFF, 1 to 8
MATRIX
ND FILTER 1, 2, 3, 4
SCENE FILE 1 to 8
SHUTTER 1/100, 1/120, 1/250, 1/500,
1/1000, 1/2000
VARIABLE
1/15, 1/10, 1/8, 1/6, 1/5, 1/4,
1/3, 1/2, 1s, 2s, 4s
SKIN DTL
SKIN KEY MARKER
SMOOTH KNEE OFF, 1, 2, 3
SOFT DTL
SUPER KNEE OFF, LOW, MID, HIGH
SUPER V
WHITE CLIP
WHITE SHADING
FOCUS Only the serial lens installation is effective.
ZOOM Only the serial lens installation is effective.
Analog Control Items Control
AUTO IRIS SET
BLACK SET
BLACK SHADING
BLACK GAMMA
COLOR CORRECTION
COLOR SATURATION
DTL BALANCE
DTL BOOST FREQUENCY
DTL GAIN
DTL NOISE SUP
DTL THRESH
DTL EDGE BW BALANCE
FINE DTL
FLARE
GAIN
GAMMA
H.PHASE
HI-LIGHT DTL
IRIS
KNEE POINT AUTO, MANUAL
KNEE SLOPE AUTO, MANUAL
MATRIX
MASTER PEDESTAL
PEDESTAL
SKIN DTL
SOFT DTL
VARIABLE SHUTTER 1/63.3 to 1/1983
* In case of 1080i60
WHITE CLIP
WHITE SHADING
FOCUS Only the serial lens installation is effective.
ZOOM Only the serial lens installation is effective.