Ikegami HC-HD300, Operation Manual

Page: 104 / 158

88 HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Menu Item
Initial
Setting
Setting Value Description, Remarks
MENU DATA
ALL VF
―
SMOOTH KNEE
TYPE-1
TYPE1, TYPE2, TYPE3,
OFF
SMOOTH KNEE is a function to adjust the compression
level of the brightness signal with KNEE. It can be selected
from the following three setting types.
TYPE1 : The compression rate of brightness is low.
TYPE2 : The compression rate of brightness is medium.
TYPE3 : The compression rate of brightness is high.
× ×
DTL V FILTER
OFF ON, OFF
If the V filter of the DTL is ON, the resolution in direction V
diminishes, making it possible to obtain an image with less
noise.
○ ×
PRESET FILE LOAD
Function to load the user settings (ENGINEER SET FILE)
or factory settings (FACTORY SET FILE) for the level
adjustment or menu of the camera.
Used to return the camera state back to the previous or initial
settings.
―
FILE SELECT
ENGINEER ENGINEER, FACTORY
ENGINEER : Initializes the state back to the user setting.
FACTORY : Initializes the state back to the initial factory
setting.
× ×
LOAD START
READY
READY, START,
CANCEL
Executes initialization.
- -
*3 : When compiling ABB/AWB reference files from the menu, No. 2 of S3 of the MPU module must be turned ON.
When changing the switch, be sure to first turn the power OFF.
After compiling the reference file, be sure to return No. 2 of S3 to OFF.
When compiling the reference file from the control panel, it is not necessary to turn this switch ON.