Ikegami HC-HD300, Operation Manual

Page: 103 / 158

87 HC-HD300 1412 VER1 (U)
5
CAMERA SETTINGS and ADJUSTMENT
5.2 Settings from the Menu
Menu Item
Initial
Setting
Setting Value Description, Remarks
MENU DATA
ALL VF
LENS SELECT
―
NUMBER
OFF NO.1 to NO.8, OFF
Select the lens file number.
-If the lens code is obtained from the lens, (CODE SEL) is
displayed on the back of the lens number display.
-If AUTO SEL is ON, "AUTO SEL" is displayed on the back
of the lens number display.
○ ×
―
NAME
(---------) 12 characters
Set the file name for each lens file.
Attaching the lens model name, etc. will make it easier to
know the correspondence between the lens number and lens.
- -
―
( )
(---------)
AUTO SEL name display
section
Displays the lens name obtained from the serial lens. - -
―
EXTENDER
OFF
ON-1, ON-2, ON-3,
x0.8 CONV, OFF
Displays the extender state. × ×
―
AUTO SEL
OFF ON, OFF
The lens file number is switched automatically according to
the model name obtained from the lens.
○ ×
―
FILE SET
OFF MANUAL, AUTO, OFF
See
"5.2 Settings from the Menu [FILE SET]" (P94)
for
the FILE SET usage method.
× ×
―
LENS TYPE
OFF
C.PORTABLE, C.STUDIO,
C.FIELD, F.PORTABLE,
F.STUDIO, F.FIELD,
OFF
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens
used in the camera.
C.PORTABLE : Canon portable lens
C.STUDIO : Canon studio lens
C.FIELD : Canon field lens
F.PORTABLE : Fujinon portable lens
F.STUDIO : Fujinon studio lens
F.FIELD : Fujinon field lens
OFF : Game tracking DTL is OFF.
Set by lens file (NO.1-8).
○ ×
―
AUTO x0.8 CONV
OFF ON, OFF
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output
aspect ratio of the down converter to carry out automatic
switching.
○ ×
―
X0.8 CONV CONT
OFF ON, OFF
If turned ON when using the X0.8 converter internal lens,
control is possible.
When not using the X0.8 converter internal lens, set to OFF.
○ ×
LENS SERIAL I/F
ON ON, OFF Set whether to respond to the serial interface of the lens or not. ○ ×
LEVEL ADJUST
―
MASTER GAMMA
0.0 -100 to +100
Sets the master gamma value.
The gamma value decreases in the direction of " -100" and
increases in the direction of "+100".
× ×
―
MASTER PED
0.0 -100 to +100
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and
increases in the direction of "+100".
× ×
―
MASTER FLARE
0.0 -100 to +100
Sets the master flare value.
The flare value decreases in the direction of "-100" and
increases in the direction of "+100".
× ×
―
DTL GAIN
0.0 -100 to +100
Sets the detail amount.
The detail amount decreases in the direction of "-100" and
increases in the direction of "+100".
× ×
ADJ CLR
READY
READY,
PUSH SET→CLR,
CANCEL
Returns the settings changed with LEVEL ADJUST to the
state prior to change as a group.
- -
PROCESS MODE
―
SMOOTH STEP GAIN
ON-0.5s
ON-0.3s, ON-0.5s,
ON-0.7s, ON-1.0s,
ON-1.5s, ON-2.0s,
OFF
Changes the STEP GAIN step by step.
Possible to choose the time until convergence.
○ ×
―
SMOOTH STEP ECC
ON-0.5s
ON-0.3s, ON-0.5s,
ON-0.7s, ON-1.0s,
ON-1.5s, ON-2.0s,
OFF
Changes the STEP ECC step by step.
Possible to choose the time until convergence.
○ ×
―
MATRIX
OFF 1, 2, 3, OFF
There are independent settings for three channels of the
matrix, which can be switched.
× ×
―
ADVANCED MATRIX
OFF ON, OFF Sets the ON/OFF of advanced matrix. × ×
―
HI-LIGHT DTL
ON ON, OFF Possible to increase the DTL level of the highlight part. × ×
―
GAIN
0.0 0 to 100
Sets the level value to be emphasized.
Level increases in the direction of +100.
× ×
LIMIT
0.0 -100 to +100
Sets the upper limit for the emphasized DTD level.
The "-100" direction lowers the limit. The "+100" direction
raises the limit and lowers the DTL level.
× ×