Ikegami HC-HD300, Operation Manual

Page: 98 / 158

82 HC-HD300 1412 VER1 (U)
5.2 Settings from the Menu
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
FOCUS ASSIST
―
ASSIST AREA
TRIGGER
ON
TRIGGER ON,
ALWAYS ON, OFF
Sets the ASSIST AREA display.
Select TRIGGER ON if you wish to display with the trigger
of lens operation, etc.
× ×
―
TRIGGER
FOCUS
FOCUS, FOCUS/ZOOM,
LENS VTR
Trigger to display ASSIST AREA.
This setting is used when TRIGGER ON is selected.
× ×
―
AREA ON/OFF SW
NONE
VTR SW, EXT SW,
NONE"
Selects the switch to turn ON/OFF the ASSIST AREA. × ×
―
VF DOT BY DOT
UNLINK LINK, UNLINK
Sets whether a control signal is sent to a VF having a DOT
BY DOT display function.
× ×
―
FOR RET
ON ON, OFF
Sets whether to display the ASSIST AREA or not when
switching to the RET signal.
× ×
―
ASSIST DATA
NO.1 N0.1 to N0.4
Selects the ASSIST DATA compiled in the ASSIST DATA
SETTING menu.
× ×
ASSIST DATA SETTING
―
SW ACTION
ALTERNATE
ALTERNATE,
MOMENTARY
If the trigger has been assigned to the LENS VTR SW, sets
whether it is momentary operation or alternate operation.
○ ○
―
AREA DISP TIME
1.0S
0.5S to 5.0S
(0.5sec increments)
Sets the time from trigger detection until the focus assist area
is erased.
○ ○
―
AREA SIZE
15 0 to 100
Sets the focus assist area range.
If set to "100", it is the entire screen domain.
○ ○
―
AREA LEVEL
60% 25% to 100% Sets the image level of the ASSIST AREA. ○ ○
―
AREA COLOR
MONO MONO, COLOR, NEGA Sets whether the ASSIST AREA image should be color,
monochrome or negative.
○ ○
―
AREA MARKER
OFF ON, OFF Sets whether the assist area frame marker is displayed or not. ○ ○
―
EDGE BOOST
LEVEL
55 0 to 100 Sets the boost level of the edge signal. ○ ○
― EDGE COLOR
MONO
MONO, CYAN,
MAGENTA, YELLOW,
GREEN, RED, BLUE
Sets the color of the edge signal.
○ ○
STORE DATA
--- N0.1 to N0.4
The contents set in the ASSIST DATA SETTING menu are
stored as ASSIST DATA. Select the numbers you wish to
store from No. 1 to No. 4 and write over the present data to
store them.
‐ ‐
MIC GAIN CONTROL
―
MIC1 STEP
-40dB
+4dB, 0dB, -10dB,
-20dB, -30dB, -40dB,
-50dB, -60dB
The MIC1 gain is changed step by step. ○ ×
―
MIC1 FINE
0 -100 to 100
Fine adjustment of the MIC1 gain. The gain decreases about
-8 dB with -100, and increases about +8 dB with +100.
○ ×
―
MIC2 STEP
-40dB
+4dB, 0dB, -10dB,
-20dB, -30dB, -40dB,
-50dB, -60dB
The MIC2 gain is changed stepwise. ○ ×
MIC2 FINE
0 -100 to 100
Fine adjustment of the MIC2 gain. The gain decreases about
-8 dB with -100, and increases about +8 dB with +100.
○ ×
RETURN SELECT MODE
―
RET-2/MIC SEL
RET-2 RET-2, MIC
Allocates a function to the RET-2/MIC button on top of
handle and on left side of camera.
○ ×
―
VTR SW SEL
RET-2
RET-2, MIC,
FOCUS ASST
Sets a function to the VTR SW button on the lens.
If the FOCUS ASSIST menu TRIGGER is set to LENS VTR,
it becomes FOCUS TRIG fixed (information display).
○ ×
RET PRIORITY
NOTHING
NOTHING, RET-1,
RET-2
If a RET-1 or RET-2 image is not displayed in the viewfinder,
sets the output signal to MON SDI (during RETURN
setting).
NOTHING : Sets to RET image last displayed in VF.
RET1 : Sets to RET-1 image.
RET2 : Sets to RET-2 image.
○ ×
FILTER SERVO MODE
SERVO CONT
SERVO SERVO, MANUAL
SERVO : Sets to automatic control.
MANUAL : Sets to manual control.
○ ×