Ikegami HC-HD300, Operation Manual

Page: 111 / 158

95 HC-HD300 1412 VER1 (U)
5
CAMERA SETTINGS and ADJUSTMENT
5.2 Settings from the Menu
3
On MENU (3/4), turn the rotary pulse switch to
position the cursor on "LENS SELECT," and press
the SET button.
The submenu is displayed.
4
Set "NUMBER", "NAME" and "EXTENDER".
Refer to the explanation of corresponding item for how
to set each data.
NO. 1 is selected here as an example.
CAUTION:
If a new file is created with the same file number as an existing file, the data will be overwritten and the old data will be lost.
5
Turn the rotary pulse switch to position the cursor
on "FILE SET," and press the SET button.
The cursor moves to the mode selection column.
6
Turn the rotary pulse switch to select the set value,
and press the SET button.
The value is confirmed, and either of the following
messages is displayed at the bottom of the screen:
- LENS No. x : Displayed when "MANUAL"
is selected.
- PUSH SET -> START : Displayed and flashes when
"AUTO" is selected.
Go to Step 7 when "AUTO" is selected.
When "MANUAL" is selected, go to Step M1 to obtain
the model name of the lens after lens file items such as GAIN/FLARE/GAMMA are adjusted by MCP, etc.
7
Press the SET button.
The lens file is created.
8
Set the S3-4 DIP switch of the MPU module back to "OFF."
Note:
- When the camera is powered OFF, the FILE SET settings are turned OFF.
- Before creating lens files, prepare all the lenses to use. Then, create the files under the same condition at a time. If the conditions are
changed, the setting cannot be accurate. Lens files memorize a difference in level between lenses. If the lighting or chart is changed,
it cannot tell whether it is the lighting error, chart error, or lens error.
ＳＣＡＮ ＦＯＲＭＡＴ ＳＥＬＥＣＴ
ＣＰＵ ＳＹＳＴＥＭ ＣＯＮＴＲＯＬ
ＡＵＴＯ ＩＲＩＳ ＳＥＴ
ＡＷＢ／ＡＢＢ ＭＯＤＥ
ＬＥＮＳ ＳＥＬＥＣＴ
ＬＥＶＥＬ ＡＤＪＵＳＴ
ＰＲＯＣＥＳＳ ＭＯＤＥ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＭＥＮＵ ＭＯＤＥ
＊＊＊ ＭＥＮＵ （３／４） ＊＊＊
▲
▲
▲
③
Position the flashing
cursor on "LENS
SELECT" and confirm.
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＮＯ．１
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
Ｘ０．８ ＣＯＮＶ ＣＯＮＴ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
▲
⑤
Position the cursor on
"FILE SET" and
confirm.
⑥
Select the set value
and confirm.
⑦
Either message is
displayed or flashes.