Ikegami HC-HD300, Operation Manual

Page: 69 / 158

53 HC-HD300 1412 VER1 (U)
3
IN
S
TA
LL
A
T
IO
N a
nd C
O
N
N
E
C
T
IO
N
3.5 BS Connection
3.5 BS Connection
This section explains how to connect the HC-HD300 to the BS. BSF-300 is used here as an example.
- Fiber cable (2-core single mode) : Diameter 9.2mm, Maximum length 350m (when VFL200HD is used)
Connecting Camera and BS
Fiber cable
Camera rear view
CAMERA connector
CAMERA connector
BSF-300 rear view
1
Connect the CAMERA connector on the rear of the BSF-300 to the CAMERA connector on the rear of the
camera via a fiber cable.
CAUTION:
Secure the fiber cable with the CAMERA CABLE clamp on the left side of the camera to remove any slack. Refer to
"SAFETY PRECAUTIONS" (iv)
described at the beginning of this manual for how to secure the cable with the cable clamp
and how to handle the fiber cable.